Wire Stories

China Automotive Magnesium Alloy Die Casting Industry Report 2021 – ResearchAndMarkets.com

DUBLIN--(BUSINESS WIRE)--The "China Automotive Magnesium Alloy Die Casting Industry Report, 2021" report has been added to ResearchAndMarkets.com's offering.

Under the general trend of automobile lightweight, the CAGR of magnesium alloy market demand reached 13.2%.

The vast majority of automotive magnesium alloy parts are die casting parts, which are mainly used in housings and brackets. Magnesium alloy is a good substitute for steel and aluminum alloy, and can reduce the product weight by 25%-75%. However, the current application ratio of magnesium alloy in automobiles is much lower than that of aluminum alloy.

Magnesium alloy facilitates lightweight vehicles

Given energy saving, environmental protection and performance, lightweight vehicles have become one of the important directions for the development of the global automotive industry. In 2020, China released Energy-saving and New Energy Vehicle Technology Roadmap 2.0, putting forward lightweight requirements for all types of vehicles. In addition, major automakers have proposed goals of promoting the development of lightweight vehicles.

At present, lightweight vehicle technology is mainly divided into three types: lightweight material technology, lightweight advanced process technology, and lightweight structure optimization technology. Lightweight materials are the key to lightweight vehicles.

Magnesium alloy features low density, high strength, good heat dissipation, strong vibration resistance, noise reduction, excellent die casting performance, and outstanding cutting performance, as an ideal lightweight material. Under the trend of lightweight vehicles, the market demand for magnesium alloy will grow rapidly.

In 2015, a single car in China only used about 1.5kg of magnesium, which was far lower than the level in Europe, America, Japan and other regions. However, with the rapid development of new energy vehicles and the acceleration of the lightweight vehicle process, the amount of magnesium used in a single vehicle in China has grown rapidly, and it is estimated to reach 15kg in 2020.

As per Energy-saving and New Energy Vehicle Technology Roadmap 2.0, a single car in China will use 45kg of magnesium alloy, which will account for 4% of the total vehicle weight by 2030 when the Chinese automobile market will demand 1.31 million tons of magnesium alloy die casting parts with a CAGR of 13.2% in 2020-2030.

Magnesium alloy boosts lightweight new energy vehicles

For every 10% reduction in the weight of new energy vehicles, the average cruising range can increase by 5%-8%. Therefore, the demand for lightweight new energy vehicles is urgent. The density of magnesium alloy is 2/3 that of aluminum and 1/4 that of steel, so it is much lighter than the latter two, which means that magnesium alloy is the best choice for lightweight new energy vehicles.

New energy vehicle battery packs account for more than 20% of the vehicle weight, thus lightweight new energy vehicles partly hinge on lightweight battery packs.

Lightweight battery packs can make outer casings, bottom trays, and inner end/side panels lighter. For example, Tesla MODEL S mainly uses aluminum alloy for the battery pack shell which weighs up to 125 kg; if it uses magnesium alloy, the weight will be reduced by about 60 kg or nearly 50%.

At present, Wanfeng Meridian, Qianhe Magnesium, RSM Group, Eontec, Ka Shui Group, etc. have made layout in the field of magnesium alloy casting for battery pack shells of new energy vehicles.

As the world's leading supplier of new energy vehicle batteries, CATL has also deployed magnesium alloy die casting for battery packs. In November 2020, CATL, Sanxiang Advanced Materials, Vansun Group, and Zhuhai Hengqin Yinmei Technology jointly established Ningde Wenda Magnesium-Aluminum Technology Co., Ltd. to build a magnesium-aluminum alloy project with a total investment of RMB800 million. The products include die casting structural parts for battery casings.

Key Topics Covered:

1 Overview of Magnesium Alloy Die Casting Industry

1.1 Introduction

1.2 Development History

1.3 Magnesium Alloy Industry Chain

2 Analysis on Automotive Magnesium Alloy Die Casting Industry

2.1 Lightweight Vehicles and Magnesium Alloy

2.2 Application History of Automotive Magnesium Alloy

2.3 Layout of automakers in Magnesium Alloy

2.4 Status Quo of Automotive Magnesium Alloy die casting industry

2.5 Automotive Magnesium Alloy Market Size

2.6 Competitive Landscape of Automotive Magnesium Alloy Die Casting Industry

2.7 Favorable Factors for Development of China's Automotive Magnesium Alloy Die Casting Industry

2.8 Development Trends of Automotive Magnesium Alloy Die Casting Industry

2.9 Bottlenecks and Constraints in Development of Magnesium Alloy

3 Automotive Magnesium Alloy Die Casting Companies in China

3.1 Wanfeng Auto Wheel

3.2 Sinyuan ZM

3.3 Shanghai Fenghwa Group

3.4 RSM Group

3.5 Eontec

3.6 Ka Shui Group

3.7 Dowell

3.8 FAW Foundry

3.9 AMGAIN

3.10 Waffer Technology

3.10.1 Automotive Business

3.11 Other Companies

3.11.1 Fujian Kunfu

3.11.2 Tianyu Mineral Industrial Group

3.11.3 Qinghai Salt Lake Trimag

3.11.4 Henan Magnesium Industry

3.11.5 Aotian Magnesium

3.11.6 Chongqing Yishente

3.11.7 Magic Precision

3.11.8 Catcher Technology

4 Foreign Automotive Magnesium Alloy Die Casting Companies

4.1 Georg Fischer AG (GF)

4.2 Druckguss Systeme AG (DGS)

4.3 Chicago White Metal Casting, Inc.(CWM)

4.4 ANDREAS STIHL AG & Co. KG (STIHL)

4.5 Pace Industries

4.6 ORTAL

4.7 Sandhar Group

4.8 RYOBI

4.9 Sundaram Clayton

4.10 Gibbs

4.11 Twin City

For more information about this report visit https://www.researchandmarkets.com/r/8rrvtd

Contacts

ResearchAndMarkets.com

Laura Wood, Senior Press Manager

[email protected]
For E.S.T Office Hours Call 1-917-300-0470

For U.S./CAN Toll Free Call 1-800-526-8630

For GMT Office Hours Call +353-1-416-8900

To Top