Disclosure: This post contains affiliate links. If you buy through them, we may earn a commission at no extra cost to you.
Damp Walls? Dr. Fixit Dampguard Classic Can End Moisture Problems
Damp patches on interior walls and water‑tightness issues in tanks can cause mould and structural damage. Dr. Fixit Dampguard Classic (1 kg, pack of 2) is now available on Amazon for ₹199, offering a cost‑effective waterproofing solution.
Key Highlights
- Two‑component epoxy formula creates a hard, water‑tight film on walls, ceilings and RCC tanks.
- Potable‑water safe – CFTRI certified, so it can be applied inside drinking‑water storage.
- Anti‑microbial and anti‑fungal additives help prevent mould growth after curing.
- Easy mix‑and‑apply process; works on both new and existing damp surfaces.
- Each pack contains two 1 kg containers, enough for up to 15 m² of interior surface.
Product Specifications
| Feature | Detail |
|---|---|
| Product Name | DR. FIXIT Dampguard Classic Damp‑Proof |
| Quantity | 1 kg per container (Pack of 2) |
| Type | Two‑component epoxy waterproof coating |
| Recommended Surfaces | Internal walls, ceilings, RCC water tanks |
| Safety Certification | CFTRI – safe for potable water contact |
| Key Additives | Anti‑microbial, anti‑fungal agents |
| Application Method | Mix resin and curing agent, brush or roller |
| Rating | 4.1 out of 5 (927 reviews) |
How It Compares
Traditional cementitious waterproofing mixes are cheap but tend to crack over time, especially on interior walls that expand and contract. Dr. Fixit Dampguard Classic uses an epoxy base, giving it superior elasticity and adhesion compared with plain cement binders. Compared with premium silicone sealants, the epoxy coating covers larger areas faster and at a lower per‑square‑metre cost. While polymer‑based membranes provide excellent protection, they often require professional installation; Dampguard Classic can be mixed and applied by a competent DIYer. In terms of safety, many waterproofing paints are not certified for drinking‑water tanks, whereas this product’s CFTRI certification makes it a rare choice for potable‑water applications. Finally, the anti‑microbial filler gives it an edge over generic epoxy primers that do not address mould growth.
Price & Deal
Current Price: ₹199 (Pack of 2 × 1 kg)
Original Price: Not listed
Discount: Not applicable
Rating: 4.1 ★ (927 reviews)
Pros and Cons
| ✅ Pros | ❌ Cons |
|---|---|
|
|
Who Should Buy This?
This coating is ideal for homeowners battling persistent damp on interior walls or ceilings, especially in basements and bathrooms. It also suits landlords who need a safe, drinkable‑water‑friendly solution for RCC water tanks in apartments. DIY enthusiasts looking for a durable, anti‑mould finish without hiring a professional will find the mix‑and‑apply process manageable. Finally, small contractors renovating heritage homes can benefit from the low‑VOC epoxy that respects older structures.
Our Verdict
Dr. Fixit Dampguard Classic delivers a rare combination of potable‑water safety, anti‑mould protection, and strong epoxy durability at a pocket‑friendly price. If you need a reliable internal waterproofing solution that you can apply yourself, this pack of two 1 kg containers is a solid buy.
Frequently Asked Questions
Is Dr. Fixit Dampguard Classic safe for drinking water tanks?
Yes. The product is CFTRI certified, meaning it meets safety standards for potable water contact.
What is the current price of Dr. Fixit Dampguard Classic on Amazon?
The pack of two 1 kg containers is priced at ₹199 on Amazon.
How much area can one pack cover?
One 1 kg container typically covers about 7‑8 m²; therefore the pack of two can treat roughly 15‑16 m² of interior surface.
Do I need professional help to apply this coating?
No. The product is designed for DIY use; just follow the mixing instructions and ensure the surface is clean and dry.